Fluke Hart 7015, 7009, 7008 高穩定度溫度校正槽

Fluke Hart 高穩定度溫度校正槽 Model7015, 7009, 7008

Fluke Hart Resistor Baths

溫度校正用的標準溫度源。
1.溫度產生採用三明治原理(加熱、等溫、冷卻)一體成形
2.可預先設定 8 種不同溫度在控制面板上
3.如有需要可加裝 RS-232 及 IEEE-488
4.溫度範圍從 -100 度 C 到 +550 度 C

Specifications	7015	7009	7108
Range	0 °C to 50 °C†	0 °C to 50 °C†	20 °C to 30 °C
Stability at 25 °C	±0.0007 °C  (water) ±0.001 °C  (mineral oil 5011)		±0.002 °C (water) ±0.004 °C (mineral oil 5011)
Uniformity	±0.003 °C at 25 °C (water) ±0.005 °C at 25 °C (mineral oil 5011)		±0.005 °C (water) ±0.008 °C (mineral oil 5011)
Temperature Setting	Digital display with push-button data entry
Set-Point Resolution	0.002 °C; high-resolution mode, 0.00003 °C
Display Resolution	0.01 °C
Digital Setting Accuracy	±1 °C		±0.5 °C
Digital Setting Repeatability	±0.01 °C
Heaters	500 and 1000 Watts		Peltier heating/cooling
Cooling Capacity	100 to 200 Watts		100 W in ambient 23 °C
Access Opening	699 x 279 mm (27.5 x 11 in)	699 x 559 mm (27.5 x 22 in)	356 x 356 mm (14 x 14 in)
Bath Chamber Dimensions (HxWxD) (unobstructed space)	699 x 279 x 330 mm (27.5 x 11 x 13 in)	669 x 559 x 330 mm (27.5 x 22 x 13 in)	356 x 203 x 355 mm (14 x 8 x 14 in)
Depth	330 mm (13 in)		203 mm (8 in)
Wetted Parts	304 stainless steel		Tank: 304 stainless steel Resistor rack: hard-anodized, perforated aluminum
Safety Cutout	Factory-set high temperature		n/a
Power	115 VAC (±10 %), 60 Hz, 15 A or 230 VAC, 50 or 60 Hz, 8 A, specify	230 VAC (±10 %), 50 or 60 Hz, 12 A (specify frequency)	115 VAC (±10 %), 50/60 Hz, 3 A or 230 VAC (±10 %), 50/60 Hz, 1.6 A, specify
Volume	95 liters (25 gallons)	167 liters (44 gallons)	51 liters (13.2 gallons)
Weight	141 kg (310 lb.)	150 kg (330 lb.)	35 kg (75 lb.)
Size (HxWxD)	1219 x 1118 x 559 mm (48 x 44 x 22 in)	1092 x 1130 x 864 mm (43 x 44.5 x 34 in)	489 x 413 x 559 mm (19.25 x 22 x 25 in)
Automation Package	Interface-it software and RS-232 computer interface are included for setting the bath temperature via an external computer. For IEEE-488, add the 2001-IEEE.
†Although the 7015 and 7009 baths are capable of reaching higher temperatures, they are designed for use with standard resistors. Therefore, the soft cutout of the instrument has been set at the factory to 50 °C to protect standard resistors placed in the bath.