RUSKA 7250 / 7050 數位壓力顯示器校正器維修

RUSKA 7250 / 7050 數位壓力顯示器校正器維修

Ruska 7250上蓋打開

Ruska 7050上蓋打開

Ruska sensor最重要的壓力感應器(包在恆溫槽裡)

壓力控制模組

主機板及控制板

本公司已由原廠授權維修FLUKE Ruska & DHI產品,並取得受訓結業証書

如您的Ruska產品控制壓力不穩定,精度飄移,不穩定或顯示器故障...等問題

都歡迎您與我聯絡討論,我們將提供您最快速最優惠的在台維修

FLUKE DHI RPM3 高精度數位壓力顯示器 (維修&新品)

FLUKE DHI RPM3 高精度數位壓力顯示器

專為半導體機台所設計的RPM3 G0030,早期為半導體業應用材料公司所引進,目前市面上多為舊品流通,本公司亦有提供RPM3專業維修及調整服務

RPM3取出上蓋

舊型電源模組,可更換新板,或舊板進行維修

內部右側為壓力感應器(也是本機器最昂貴的地方)

RPM3的main主板,連接RS232及顯示器的故障

其他如漏氣或數值跑掉,sensor故障亂數跳位...等,本公司皆能提供您最優惠最快速的維修服務

FLUKE DHI RPM3 高精度數位壓力顯示器 (維修&新品)

FLUKE DHI RPM3 高精度數位壓力顯示器

專為半導體機台所設計的RPM3 G0030,早期為半導體業應用材料公司所引進,目前市面上多為舊品流通,本公司亦有提供RPM3專業維修及調整服務

RPM3取出上蓋

舊型電源模組,可更換新板,或舊板進行維修

內部右側為壓力感應器(也是本機器最昂貴的地方)

RPM3的main主板,連接RS232及顯示器的故障

其他如漏氣或數值跑掉,sensor故障亂數跳位...等,本公司皆能提供您最優惠最快速的維修服務

FLUKE 742A AC/DC 標準電阻

AC/DC 標準電阻

Fluke DC Resistance Standards 

溫度或電阻校正用的標準電阻。

Specifications
Model	Nominal Value W	Stability, ppm 6 Months	Stability, ppm 12 Months	Max Change, ppm from 23°C ±5°C (±ppm)	Calibration Uncertainty, ±ppm
742A-1	1	5	8	3.0	1.0
742A-10	10	5	8	3.0	1.0
742A-25	25	5	8	3.0	1.0
742A-100	100	4	6	3.0	1.0
742A-1K	1K	4	6	2.0	1.5
742A-10K	10K	2.5	4	1.5	1.0
742A-100K	100K	4	6	2.0	2.5
742A-1M	1M	6	8	2.0	5.0
742A-10M	10M	6	9	3.0	10.0
742A-7002	Transit Case (holds two units)

Fluke Hart 6020 6022 6024 高穩定度溫度校正槽

Fluke Hart 高穩定度溫度校正槽 Model 6020 6022 6024

Fluke Hart High temperature calibration oil baths

特點：
1.採用矽油、酒精、水 …… 等
2.高穩定度 0.015 度 C 到 0.0008 度 C
3.高均勻性 0.025 度 C 到 0.002 度 C
4.溫度產生採用三明治原理
5.大容量水槽以提高生產力

規格:

Specifications
	6020	6022	6024
Range	40 °C to 300 °C†
Uniformity	±0.001 °C at 40 °C (water) ±0.003 °C at 100 °C (oil 5012) ±0.005 °C at 300 °C (oil 5017)
Temperature Setting	Digital display with push-button data entry
Set-Point Resolution	0.01 °C; high-resolution mode, 0.00018 °C
Display Temperature Resolution	0.01 °C
Digital Setting Accuracy	±1 °C
Digital Setting Repeatability	±0.02 °C
Heaters	350 and 1050 watts
Access Opening (call for custom openings)	127 x 254 mm (5 x 10 in)		184 x 324 mm (7.25 x 12.75 in)
Depth	305 mm (12 in)	464 mm (18.25 in)	337 mm (13.25 in)
Wetted Parts	304 stainless steel
Power	115 VAC (±10 %), 50/60 Hz, 10 A or 230 VAC (±10 %), 50/60 Hz, 5 A, specify
Volume	27 liters (7.2 gallons)	42 liters (11.2 gallons)
Weight	32 kg (70 lb.)	36 kg (80 lb.)
Size (HxWxD)	648 x 406 x 508 mm (25.5 x 16 x 20 in)	813 x 406 x 508 mm (32 x 16 x 20 in)	699 x 483 x 584 mm (27.5 x 19 x 23 in)
Automation Package	Interface-it software and RS-232 computer interface are included for setting bath temperature via remote computer. For IEEE-488, add the 2001-IEEE.
†External cooling required for operation below 40 °C. Cooling coils are built into the

Fluke Hart 6050H 高穩定度溫度校正槽

Fluke Hart 高穩定度溫度校正槽 6050H

Fluke Hart Really Hot Bath

溫度校正用的標準溫度源。

Specifications
Range	180 °C to 550 °C
Stability	±0.002 °C at 200 °C (salt) ±0.004 °C at 300 °C (salt) ±0.008 °C at 550 °C (salt)
Uniformity	±0.005 °C at 200 °C (salt) ±0.020 °C at 550 °C (salt)
Temperature Setting	Digital display with push-button data entry
Set-Point Resolution	0.01 °C; high-resolution mode, 0.00018 °C
Display Temperature Resolution	0.01 °C
Digital Setting Accuracy	±1 °C
Digital Setting Repeatability	±0.02 °C
Heaters	400, 1200, and 2000 Watts
Access Opening	127 x 254 mm (5 x 10 in)
Depth	305 mm (12")
Wetted Parts	304 stainless steel
Power	230 VAC (±10 %), 50/60 Hz, 10 A
Volume	27 liters (7.1 gal), requires 50 kg (112 lb) of bath salt
Weight	82 kg (180 lb.)
Size (HxWxD)	724 x 518 x 622 mm (28.5 x 20.4 x 24.5 in)
Automation Package	Interface-it software and RS-232 computer interface are available for setting bath temperature via remote computer. For IEEE-488, add the 2001-IEEE to the automation package.

Fluke Hart 6050H 高穩定度溫度校正槽

Fluke Hart 高穩定度溫度校正槽 6050H

Fluke Hart Really Hot Bath

溫度校正用的標準溫度源。

Specifications
Range	180 °C to 550 °C
Stability	±0.002 °C at 200 °C (salt) ±0.004 °C at 300 °C (salt) ±0.008 °C at 550 °C (salt)
Uniformity	±0.005 °C at 200 °C (salt) ±0.020 °C at 550 °C (salt)
Temperature Setting	Digital display with push-button data entry
Set-Point Resolution	0.01 °C; high-resolution mode, 0.00018 °C
Display Temperature Resolution	0.01 °C
Digital Setting Accuracy	±1 °C
Digital Setting Repeatability	±0.02 °C
Heaters	400, 1200, and 2000 Watts
Access Opening	127 x 254 mm (5 x 10 in)
Depth	305 mm (12")
Wetted Parts	304 stainless steel
Power	230 VAC (±10 %), 50/60 Hz, 10 A
Volume	27 liters (7.1 gal), requires 50 kg (112 lb) of bath salt
Weight	82 kg (180 lb.)
Size (HxWxD)	724 x 518 x 622 mm (28.5 x 20.4 x 24.5 in)
Automation Package	Interface-it software and RS-232 computer interface are available for setting bath temperature via remote computer. For IEEE-488, add the 2001-IEEE to the automation package.

Fluke Hart 6050H 高穩定度溫度校正槽

Fluke Hart 高穩定度溫度校正槽 6050H

Fluke Hart Really Hot Bath

溫度校正用的標準溫度源。

Specifications
Range	180 °C to 550 °C
Stability	±0.002 °C at 200 °C (salt) ±0.004 °C at 300 °C (salt) ±0.008 °C at 550 °C (salt)
Uniformity	±0.005 °C at 200 °C (salt) ±0.020 °C at 550 °C (salt)
Temperature Setting	Digital display with push-button data entry
Set-Point Resolution	0.01 °C; high-resolution mode, 0.00018 °C
Display Temperature Resolution	0.01 °C
Digital Setting Accuracy	±1 °C
Digital Setting Repeatability	±0.02 °C
Heaters	400, 1200, and 2000 Watts
Access Opening	127 x 254 mm (5 x 10 in)
Depth	305 mm (12")
Wetted Parts	304 stainless steel
Power	230 VAC (±10 %), 50/60 Hz, 10 A
Volume	27 liters (7.1 gal), requires 50 kg (112 lb) of bath salt
Weight	82 kg (180 lb.)
Size (HxWxD)	724 x 518 x 622 mm (28.5 x 20.4 x 24.5 in)
Automation Package	Interface-it software and RS-232 computer interface are available for setting bath temperature via remote computer. For IEEE-488, add the 2001-IEEE to the automation package.

FLUKE Hart 7007 6054 6055高穩定度溫度校正槽 Deep-Well Baths

高穩定度溫度校正槽 Model 7007 6054 6055

Deep-Well Baths

特點：
1.採用矽油、酒精、水 …… 等
2.高穩定度 0.015 度 C 到 0.0008 度 C
3.高均勻性 0.025 度 C 到 0.002 度 C
4.溫度產生採用三明治原理(加熱、等溫、冷卻)一體成形

Specifications	7007	6054	6055
Range	–5 °C to 110 °C	50 °C to 300 °C	200 °C to 550 °C
Stability	±0.001 °C at 0 °C  (ethanol) ±0.003 °C at 100 °C (oil 5012)	±0.003 °C at 100 °C (oil 5012) ±0.005 °C at 300 °C (oil 5017)	±0.003 °C at 200 °C (salt) ±0.01 °C at 550 °C (salt)
Uniformity	±0.004 °C at 0 °C (ethanol) ±0.007 °C at 100 °C (oil 5012)	±0.007 °C at 100 °C (oil 5012) ±0.015 °C at 300 °C (oil 5017)	±0.005 °C at 200 °C (salt) ±0.010 °C at 550 °C (salt)
Temperature Setting	Digital display with push-button data entry
Set-Point Resolution	0.002 °C, high res. 0.00003 °C	0.01 °C, high res. 0.00018 °C
Display Temperature Resolution	0.01 °C
Digital Setting Accuracy	±1 °C
Digital Setting Repeatability	±0.005 °C	±0.01 °C
Heaters	250 to 1000 W	250 to 1000 W	225 to 1800 W
Working Area	178 mm dia. (7 in)	196 mm dia. (7.7 in)	107 mm dia. (4.2 in)
Depth	610 mm (24 in) deep, 178 mm dia. (7 in), removable polycarbonate cover	610 mm deep (24 in), 196 mm dia. (7.7 in), removable SST lid	432 mm deep (17 in), 107 mm dia. (4.2 in), removable SST lid, special viewing channel for LIG sighting
Wetted Parts	304 stainless steel
Power	230 VAC (±10 %), 50 or 60 Hz, 14 A (Specify frequency, contact Hart if CE mark required.)	230 VAC (±10 %), 50/60 Hz, 10.7 A	230 VAC (±10 %), 50/60 Hz, 7.8 A
Volume	42 liters (11.2 gal.)	50 liters (13.2 gal.)	19.8 liters (5.2 gal., 43 kg [95 lb.] of bath salt)
Size (DxWxH)	470 x 775 x 194 mm to working surface (18.5 x 30.5 x 47 in), 1397 mm (55 in) to top of stir motor, 914 mm (36 in) to control panel	572 x 762 x 1219 mm to working surface (22.5 x 30 x 48 in), 1422 mm (56 in) to top of stir motor box, 914 mm (36 in) to control panel	572 x 775 x 1219 mm to working surface (22.5 x 30.5 x 48 in), 1524 mm (60 in) to top of stir motor box, 914 mm (36 in) to control panel
Distance from Line of Sight to Top of Fluid	9.5 mm (3/8 in)	15.9 mm (5/8 in)
Automation Package	Interface-it software and RS-232 computer interface are included for setting bath temperature via remote computer. For IEEE-488, add the 2001-IEEE.

Fluke Hart 7008.7040.7037.7012.7011 高穩定度溫度校正槽

Fluke Hart 高穩定度溫度校正槽 Model 7008.7040.7037.7012.7011

Fluke Hart Refrigerated temperature calibration baths
半導體IC環溫測試的最愛機種
搭配矽油可置放多個IC或IC板

溫度校正用的標準溫度源。
1.採用矽油、酒精、水 …… 等
2.高穩定度 0.015 度 C 到 0.0008 度 C
3.高均勻性 0.025 度 C 到 0.002 度 C

Specifications	7008	7040	7037	7012	7011
Range	–5 °C to 110 °C	–40 °C to 110 °C		–10 °C to 110 °C
Stability	±0.0007 °C at 25 °C (water) ±0.001 °C at 25 °C (mineral oil)	±0.002 °C at –40 °C (ethanol) ±0.0015 °C at 25 °C (water) ±0.003 °C at 100 °C (oil 5012)		±0.0008 °C at 0 °C (ethanol) ±0.0008 °C at 25 °C (water) ±0.003 °C at 100 °C (oil 5012)
Uniformity	±0.003 °C at 25 °C (water) ±0.004 °C at 25 °C (mineral oil)	±0.004 °C at –40 °C (ethanol) ±0.002 °C at 25 °C (water) ±0.004 °C at 100 °C (oil 5012)		±0.003 °C at 0 °C (ethanol) ±0.002 °C at 25 °C (water) ±0.004 °C at 100 °C (oil 5012)
Temperature Setting	Digital display with push-button data entry
Set-Point Resolution	0.002 °C; high-resolution mode, 0.00003 °C	0.01 °C; high-resolution mode, 0.00007 °C		0.002 °C; high-resolution mode, 0.00003 °C
Display Resolution	0.01 °C
Digital Setting Accuracy	±1 °C
Digital Setting Repeatability	±0.01 °C			±0.005 °C
Heaters	500 and 1000 Watts
Access Opening (call for customs)	324 x 184 mm (12.75 x 7.25 in)	127 x 254 mm (5 x 10 in)	162 x 292 mm (6.38 x 11.5 in)		127 x 254 mm (5 x 10 in)
Depth	331 mm (13 in)	305 mm (12 in)	457 mm (18 in)		305 mm (12 in)
Wetted Parts	304 stainless steel
Power	115 VAC (±10 %), 60 Hz, 14 A or 230 VAC, 50 or 60 Hz, 8 A, specify	115 VAC (±10 %), 60 Hz, 16 A or 230 VAC (±10 %), 50 or 60 Hz, 9 A (specify voltage and frequency)		115 VAC (±10 %), 60 Hz, 14 A or 230 VAC (±10 %), 50 Hz, 7 A, specify
Volume	42 liters (11.2 gal)	27 liters (7.2 gal)	42 liters (11.2 gal)		27 liters (7.2 gal)
Weight	61 kg (135 lb)	63.5 kg (40 lb)	68 kg (150 lb)		56.7 kg (125 lb)
Size (HxWxD)	610 x 775 x 483 mm (24 x 30.5 x 19 in)	622 x 768 x 483 mm (24.5 x 30.25 x 19 in)	775 x 768 x 483 mm (30.5 x 30.25 x 19 in)	762 x 686 x 401 mm (30 x 27 x 15.8 in)	559 x 686 x 401 mm (22 x 27 x 15.8 in)
Automation Package	Interface-it software and RS-232 computer interface are included for setting the bath temperature via an external computer. For IEEE-488, add the 2001-IEEE. (Interfaces not available for Model 7011.)

Fluke Hart 7015, 7009, 7008 高穩定度溫度校正槽

Fluke Hart 高穩定度溫度校正槽 Model7015, 7009, 7008

Fluke Hart Resistor Baths

溫度校正用的標準溫度源。
1.溫度產生採用三明治原理(加熱、等溫、冷卻)一體成形
2.可預先設定 8 種不同溫度在控制面板上
3.如有需要可加裝 RS-232 及 IEEE-488
4.溫度範圍從 -100 度 C 到 +550 度 C

Specifications	7015	7009	7108
Range	0 °C to 50 °C†	0 °C to 50 °C†	20 °C to 30 °C
Stability at 25 °C	±0.0007 °C  (water) ±0.001 °C  (mineral oil 5011)		±0.002 °C (water) ±0.004 °C (mineral oil 5011)
Uniformity	±0.003 °C at 25 °C (water) ±0.005 °C at 25 °C (mineral oil 5011)		±0.005 °C (water) ±0.008 °C (mineral oil 5011)
Temperature Setting	Digital display with push-button data entry
Set-Point Resolution	0.002 °C; high-resolution mode, 0.00003 °C
Display Resolution	0.01 °C
Digital Setting Accuracy	±1 °C		±0.5 °C
Digital Setting Repeatability	±0.01 °C
Heaters	500 and 1000 Watts		Peltier heating/cooling
Cooling Capacity	100 to 200 Watts		100 W in ambient 23 °C
Access Opening	699 x 279 mm (27.5 x 11 in)	699 x 559 mm (27.5 x 22 in)	356 x 356 mm (14 x 14 in)
Bath Chamber Dimensions (HxWxD) (unobstructed space)	699 x 279 x 330 mm (27.5 x 11 x 13 in)	669 x 559 x 330 mm (27.5 x 22 x 13 in)	356 x 203 x 355 mm (14 x 8 x 14 in)
Depth	330 mm (13 in)		203 mm (8 in)
Wetted Parts	304 stainless steel		Tank: 304 stainless steel Resistor rack: hard-anodized, perforated aluminum
Safety Cutout	Factory-set high temperature		n/a
Power	115 VAC (±10 %), 60 Hz, 15 A or 230 VAC, 50 or 60 Hz, 8 A, specify	230 VAC (±10 %), 50 or 60 Hz, 12 A (specify frequency)	115 VAC (±10 %), 50/60 Hz, 3 A or 230 VAC (±10 %), 50/60 Hz, 1.6 A, specify
Volume	95 liters (25 gallons)	167 liters (44 gallons)	51 liters (13.2 gallons)
Weight	141 kg (310 lb.)	150 kg (330 lb.)	35 kg (75 lb.)
Size (HxWxD)	1219 x 1118 x 559 mm (48 x 44 x 22 in)	1092 x 1130 x 864 mm (43 x 44.5 x 34 in)	489 x 413 x 559 mm (19.25 x 22 x 25 in)
Automation Package	Interface-it software and RS-232 computer interface are included for setting the bath temperature via an external computer. For IEEE-488, add the 2001-IEEE.
†Although the 7015 and 7009 baths are capable of reaching higher temperatures, they are designed for use with standard resistors. Therefore, the soft cutout of the instrument has been set at the factory to 50 °C to protect standard resistors placed in the bath.